BMS (Battery Management System)
An electronic board that monitors a lithium battery and shuts it down before voltage, current, or temperature go unsafe.
What It Means
A BMS is the control board inside or attached to a lithium battery. It watches cell voltage, current, and temperature. It balances the cells and disconnects the battery if anything goes out of range, such as overcharge, over-discharge, short circuit, or charging in freezing weather. Most LiFePO4 batteries include one, and many report state of charge. The BMS has a continuous amp rating, which caps the power the battery can deliver. An inverter that tries to draw more will cause the BMS to shut the battery off.
Example
A 12 V LiFePO4 battery has a BMS rated for 100 A continuous. Its maximum steady output is about 100 × 12 = 1,200 W. A 2,000 W inverter would trip it at full load, so the system needs a higher-rated BMS or two batteries in parallel.