Offgrid Atlas

Appliance Energy Usage Calculator

Add up the watt-hours each appliance uses in a day, then see the total energy your solar system needs to supply. The calculator handles DC and AC loads and fridge-style duty cycles.

Reading Your Result

Each line shows one appliance's daily energy. Watts tell you how hard it pulls, while hours tell you how long it pulls, and watt-hours are the two multiplied. Cycling loads such as fridges use a duty cycle, which is the share of the day the compressor actually runs.

The total adds a loss for AC loads, since the inverter wastes a little power turning battery DC into AC. DC loads skip that loss. If your total is higher than expected, look for the biggest line first, because one heater or kettle can outweigh ten lights.

How It's Calculated

Formula

Daily Wh = watts × hours per day × duty cycle

Appliance energy. Use a duty cycle of 1 for loads that run steadily. Fridges often run 30 to 50 percent of the time.
Formula

Daily Wh = DC Wh + AC Wh ÷ 0.92

System daily energy. Inverter efficiency is applied once to the AC subtotal.

Worked Examples

Worked example · Pakistan, small AC home

A fan at 75 W for 8 hours uses 600 Wh. Five 9 W LED lights (45 W) for 5 hours use 225 Wh.

A 150 W fridge runs 24 hours at a 0.35 duty cycle, so 150 × 24 × 0.35 = 1,260 Wh. A 100 W TV for 4 hours uses 400 Wh.

AC subtotal = 600 + 225 + 1,260 + 400 = 2,485 Wh.

All loads are AC, so daily energy = 2,485 ÷ 0.92 = 2,701 Wh.

Worked example · Kenya, mixed DC and AC loads

DC loads are 12 V lights at 20 W for 5 hours (100 Wh), USB phone charging at 10 W for 4 hours (40 Wh), and a DC fridge at 45 W × 24 h × 0.40 = 432 Wh.

DC subtotal = 100 + 40 + 432 = 572 Wh.

The one AC load is a laptop at 60 W for 3 hours, which is 180 Wh.

Daily energy = 572 + 180 ÷ 0.92 = 572 + 196 = 768 Wh.

Common Mistakes

  • Using the plug label's maximum watts for a device that normally draws far less.
  • Counting a fridge as 24 hours of full power with no duty cycle.
  • Missing standby loads such as routers, chargers, and inverter idle draw that run around the clock.
  • Treating a phone charger's input rating as the power it actually uses.

Frequently Asked Questions

How can I find the real wattage of an appliance?

A plug-in energy meter gives the true figure and shows what a fridge uses over a full day. The label gives a maximum, which is often higher than normal use.

What's a duty cycle?

It's the fraction of time a load is actually drawing power. A fridge may be on for 8 hours out of 24, which is a duty cycle of 0.33.

Are DC appliances really more efficient?

They avoid the inverter loss, which saves about 8 percent on those loads. The bigger savings come from choosing efficient models, like a DC compressor fridge.

Should I count tools I use once a week?

Include them if the system must run them. Average the energy over the week, or size for the day you use them if the battery can't cover it otherwise.

Why does the AC total grow after I add the efficiency?

The battery has to supply more energy than the appliance receives, because the inverter wastes some. The 0.92 factor adds that waste back.

Related Calculators and Guides

Results are estimates based on typical values and the settings above. Local electrical codes apply, and a qualified installer should check the final design before you buy or wire anything. Read the full disclaimer.